1. AudioSource AMP-100 2-Channel Bridgeable Stereo Power Amplifier
|
From: Audio Source
Features:- 2-channel 100-watt (50 watts x 2) power amplifier (provides 150 watts RMS bridged mono power)
- Ideal for use as a second-zone amplifier or as a rear-channel amplifier in a 6.1- and 7.1-channel system
- Pair of stereo inputs with priority override; A/B speaker selector allows multi-room amplification
- Signal-sensing auto-on/off switching conserves power while simplifying setup
- Measures 16.5 by 2.9 by 9.25 inches (W x H x D); 2-year warranty
| 
More Info |
2. Onkyo M-282 2-Channel Power Amplifier
|
From: Onkyo
Features:- 100 Watts per Channel Minimum into 8 Ohms, 2 Channels Driven, FTC
- 2 HDMI Inputs and 1 Output (1080p Pass-thru)
- High current, low impedance drive
- Input level adjustment
- 12volt trigger
| 
More Info |
3. AudioSource Amp 200 High-Current Stereo Amplifier (80 Watts x 2)
|
From: Audio Source
Features:- 80 watts RMS x 2 (into 8 ohms); 250 watts RMS x 1 (into 8 ohms) with bridged mono use
- A/B speaker selector allows multi-room amplification; uses low-distortion toroidal power supply
- Signal-sensing auto-on/off and 12-volt trigger ports (in and out) for custom configuration
- High- and Low-level inputs for maximum flexibility
- Measures 16.5 x 3.5 x 14 inches (W x H x D)
| 
More Info |
4. Pyle Pro PCA1 Mini 2x15W Stereo Power Amplifier
|
From: Pyle
Features:- RCA male cable inputs for direct source connection
- Small form factor for portability
- Speaker push-terminals for quick connections
- 2 x 15W peak power output
| 
More Info |
5. TIC CORPORATION AMP10 Exterior Receiver Amplifier (Black Finish)
|
From: TIC
Features:- Weatherproof Design
- 12V Power Supply
- Cd, Mp3 and Ipod(R) Inputs
- Imp: 4-8 Ohm
- Output: 4X Speakers
| 
More Info |
6. AudioSource Amp One/A 160-Watt Stereo Power Amplifier with Internal Bridging
|
From: AudioSource
Features:- 160-watt stereo amp (80 watts x 2) with switchable 200-watt mono option
- Line-in jacks connect to such sources as receivers, CD players, or preamplifiers
- Line-out/thru jacks for creating powerful multi-amp setup; requires preamp
- 20 Hz to 20 kHz frequency response and total harmonic distortion of 0.04 percent
- Measures 16.5 x 2.38 x 11.62 inches (W x H x D); 2-year warranty
| 
More Info |
7. NuForce Icon (Integrated Desktop Audio Amplifier, Silver Color).
|
From: Nuforce
April 25, 2008
Features:- Inputs: RCA, USB (USB 1.1 compliance), 3.5mm Stereo
- Speaker Outputs (RJ45 connectors). NuForce RJ45 to banana plug speaker cables are provided with NuFo
- Headphone Output: Maximum output @32 ohm Load = 31.25mW, THD (20Hz ~ 20KHz) < 0.03%
- Line Out (for Subwoofer) connection, USB DAC (USB 1.1 compliance)
- Power Adapter - 12-14V, 25W, 100-240VAC worldwide voltages
| 
More Info |
8. NAD - C 325BEE - Integrated Amplifier
|
From: NAD Audio
| 
More Info |
9. AudioSource Pre One/A Stereo Preamplifier
|
From: AudioSource
Features:- Features 6 line-level inputs and 2 preamp outputs
- Tape loop for outboard processors
- Volume, balance, and bass and treble controls
- 110 dB signal-to-noise ratio
- Less than 0.008 percent THD
| 
More Info |
10. NuForce Icon (Integrated Desktop Audio Amplifier, Black Color)
|
From: Nuforce, Inc
April 25, 2008
Features:- Inputs: RCA, USB (USB 1.1 compliance), 3.5mm Stereo
- Speaker Outputs (RJ45 connectors). NuForce RJ45 to banana plug speaker cables are provided with NuFo
- Headphone Output: Maximum output @32 ohm Load = 31.25mW, THD (20Hz ~ 20KHz) < 0.03%
- Line Out (for Subwoofer) connection, USB DAC (USB 1.1 compliance)
- Power Adapter - 12-14V, 25W, 100-240VAC worldwide voltages
| 
More Info |
Anything Goes Trivia
Trevor
Megaton Man
